SimScale simulation projects by azulsyahmi | Page 1

azulsyahmi's profile

Does it flow? 
It is a fluid heat transfer block/water boiler block. The block goes onto heat source, water gets pumped into it, and aim is to heat up the water.

To increase the surface area there are lots of fins inside, and fluid needs to turn 180, so the fins at the turn are in a radial pattern.

I wanted to simulate the water flow to see what it might do, and see if there are any massive dead spots.

Seems like there is a lot of interesting things going on. - Copy

Assessing drag coefficient and Aerodynamic forces - Copy

Testing the dimensions and efficiency of an helical vawt - Copy

SAMPLE PROJECTS FOR 3D PRINTED DUCT DESIGNS - Copy

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation. - Copy

CFD of a CPAP cooling adaption for a 3D printed Q5 effector - Copy

Define mold sealing objectives and strategies - Copy

https://www.printables.com/model/588524-mk4-bi-directional-fan-duct-lightweight-and-effect - Copy

3D PRINTER DUCT TESTING FOR UPCOMING SHOWDOWN - Copy

Public Profile

azulsyahmi's profile