SimScale simulation projects by avenizelos | Page 1

avenizelos's profile

Testing Aerodynamics of my own model of the Mercedes-AMG F1 W10

Example project of a multiphysics application. A Static and a Frequency analyses are used to determine the structural behavior of the assembly. Then, a conjugate heat transfer analysis will determine the thermal behavior of the cooling process of the motor.

Fan forced convection cooling of an EV battery pack

Demonstration project of an electronics enclosure using CHT v2. Comparison different passive heat sink designs and comparison of active and passive cooling

Aerodynamic analysis of a track focused sports car.

Demo of cooling of Raspberry Pi using the Immersed Boundary Method (IBM). 
IBM makes CAD cleanup and defeaturing obsolete. A CAD with detailed electronic features (pins, connectors, engravings, etc.) can be directly imported as is for simulation
In this demo a Raspberry Pi is overclocked and the heat transfer behaviour is compared for two cases where the fan is off and on.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

avenizelos's profile