SimScale simulation projects by atanas_kuzev | Page 1

atanas_kuzev's profile

A simple simulation of  a die forming process.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Structural  analysis  of plates. The models are created in Autodesk Fusion and are imported in Simscale.

Simulation of the two-phase free surface water channel
flow over a step profile.

The goal is simulating of a snap-fit design.

The effect of numerics on the simulation quality and convergence time.

CFD investigation of a vessel with an anchor agitator. Mesh refinement from  Ali Asad.

Drone_WS_Session1_L1Drone-Workshop-HomeWork_1-Task_2

This project contains everything you need to work on the first homework assignment of the drone workshop

In this project a multiphase flow simulation of a stirred reactor is demonstrated.

Simulation of bending of plate under load.

Simulation of mixing in T-Junction. Fluid - Water

Tutorial project to simulate external Aerodynamics of a futuristic car model

Mounting of glass plate in trim profile. Nonlinear static analysis.

A Investigation of turbulent characteristics in stirring vessels.

This project contains everything you need to work on the second homework assignment of the drone workshop

CFD investigation of a vessel with an anchor agitator

FEA Master Class Session 3 handout: In this project the drop test of an iPhone 6 has been performed with and without case.

The purpose of this study is to validate the solver for snap-fit simulations by comparing it to the experimental data presented in the paper. The mating force and the maximum deflection of the snap seen in the simulation has to match the experimental values given in the paper.

This project demonstrates the usage of rotating zones

Public Profile

atanas_kuzev's profile