SimScale simulation projects by asoni | Page 1

asoni's profile

FSAE-Workshop Session-2 Homework project for aerodynamics of complete Formula Student Race Car

FSAE workshop session 1-Front Wing Analysis homework tutorial project.
For Step-By-Step see: https://www.simscale.com/forum/t/step-by-step-tutorial-homework-of-session-1/52675

Structural Analysis of Front Wheel Upright

In this project vibration analysis of jet engine is performed.

Heat Transfer Analysis of a cooling plate

This project involves the simulation of stress analysis of an aircraft wing. There are total 6 comparison configurations with 3 different models and two different load definition.

FSAE-Workshop Session-3 Homework project for aerodynamics of full car

This project involves the simulation of ventilation in an aircraft cabin. There are 6 comparison configurations with 3 different inlets and 2 outlets.

Related to step-by-step tutorial of the biomedical workshop (session 1)

https://www.simscale.com/forum/t/biomedical-engineering-workshop-session-1-stress-shielding-in-a-hip-joint-prosthesis/36830/3

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

The project simulates 2 cases of aircraft wings to compare the aerodynamic effects.

Homework for the Sport workshop : Session 2 
CFD analysis of a  bike tyre

Thermal Mechanics study for combustion chamber

This project demonstrates the usage of rotating zones

Webinar Project- Carotid Artery Bifurcation
The project simulates the flow of blood as a non-newtonian fluid through a realistic Carotid Artery Bifurcation. Simulation are performed for 3 cases- of a healthy blood vessel  with no calcification or blockage and through an moderately and severely calcified or blocked blood vessel. 
The results show the differences in pressure, velocity profile and the outlet flow  through the 2 branches.

Flow conditions are based on a paper: STUDY OF BLOOD FLOW IN A BIFURCATION WITH A STENOSIS,
Sonia I.S. Pinto, E.D. Costa, J.B.L.M. Campos, J.M. Miranda

Related to step-by-step tutorial of the biomedical workshop (session 2) https://www.simscale.com/forum/t/biomedical-engineering-workshop-session-2-analysis-of-cardiovascular-stent/36862

FEA Master Class Session 3 handout: In this project the drop test of an iPhone 6 has been performed with and without case.

Handout project for the Sports Aerodynamics Workshop : Homework for Session 1 
(27th March 2017 )

Handout  for Sports Aerodynamics Workshop: Session 3

Bending and Torsional Load On Aircraft Wing

Analyze the aerodynamics of airplane using CFD

Public Profile

asoni's profile