SimScale simulation projects by ashfak_siddiq | Page 1

ashfak_siddiq's profile

Validation Case for the Coursera course on engineering simulation.

In this project a static analysis of an I-beam under remote force is demonstrated.

Status: Public. - Copy

Template for the convergence study course in Coursera - Copy

This project demonstrates the static stress analysis of three aircraft engine bearing bracket models considering both linear and nonlinear material definition. The models are tested with horizontal and vertical loading conditions as provided on the challenge page of GrabCAD. - Copy

This tutorial project aims to showcase how to set up and run a simulation for a pump geometry. The Standard meshing tool was used. - Copy

Public Profile

ashfak_siddiq's profile