SimScale simulation projects by anehring | Page 1

anehring's profile

Pressure drop and convection coefficient in internal cooling passage

Pressure drop through intake air baffle grille

Heat transfer and flow through a spoked hub

Induced stresses in an unevenly heated pipe.

Check to see if a motor can be cooled with natural convection or if a fan will be required.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Convection Coefficient Determination for Air Cooled Motor Lamination

Stress Analysis of an Ear Mounted Compressor

Airflow between radiator fins with perpendicular inlet and outlet

Heat transfer through a flame spray insulated chain facing block

Thermomechanical Stress in Drum with non-ideal OD insulation

Thermomechanical Stress in a roll formed and welded drum tire

Expansion stress in a segmented reinforcement

Contact stress between rollers and trommel

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

anehring's profile