SimScale simulation projects by andrea_perez | Page 1

andrea_perez's profile

Here , you can see a straight pipe of L equal to 20 m and D equal to 1m

The aim is to obtain a correct yplus and pressure drop with a proper mesh. 

Postprocessing has been validated with the theoric results.

validate de mesh and yplus in a straight pipe

ejemplo de tubería recta en régimen turbulento con malla concéntrica- wall layer

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

andrea_perez's profile