SimScale simulation projects by alejo | Page 1

alejo's profile

Empty project containing the geometry of an engine piston for the thermomechanical tutorial of an engine piston

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Elemento solido. Material Acero. verificar deformación y tensiones

Análisis elemento finito a un aviga simple

Análisis de estrés simple en bastidor simple

Tutorial project for linear static analysis of a crane

Sample project for how to set-up the Hex-Dominant Parametric mesh for flow around a vehicle body.

This project shows how to simulate the airflow around a sports car.

This project demonstrates a dynamic simulation of a suspension.

In this project static stress analysis of a Toyota Hilux bumper was performed.

Original project of @miguel_angel_a

In this project, a dynamic nonlinear impact analysis of a human skull with and without helmet is performed.

The project illustrates how to simulate airflow around a Tesla Model 3.

Tutorial project to set up the Hex-dominant Parametric mesh for rotating geometries. This mesh can then be used for MRF and AMI simulations that incorporate rotation effects.

Double girder gantry crane. Created for webinar on preparing geometry for simulation.

In this project a nonlinear dynamic analysis of a valve spring is demonstrated.

FSAE-Workshop Session-2 Homework project for aerodynamics of complete Formula Student Race Car

Simulación CFD de una carrocería simple.

This meshing tutorial shows how to setup the Tetrahedral automatic, Tetrahedral parametric and the Tetrahedral with local refinements for a structural analysis simulation.

Public Profile

alejo's profile