SimScale simulation projects by alednev | Page 1

alednev's profile

Simple project using Incompressible CFD
Goal: verify following claims about automotive intake manifolds:
1. A runner should be raised above plenum plane
2. Plenum should continue after the last runner
3. Throttle chamber should be raised above runners
4. Plenum must be a conical shape to even-out air velocity between runners
5. Trumpets inside a plenum increase air velocity

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

alednev's profile