SimScale simulation projects by al2133003195 | Page 1

al2133003195's profile

Empty project containing the geometry of an engine piston for the thermomechanical tutorial of an engine piston

Tutorial project for linear static analysis of a crane

This project aims to showcase the different configuration options for the standard meshing tool, including basic and advanced settings. The various refinements are also covered.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This project simulates instantaneous turbulent wake of a cylinder body via LES method.

This project simulates compressible turbulent flow through a de Laval nozzle.

This project simulates laminar flow through a straight circular pipe.

Tutorial project for setting up the Automated Hex-dominant for internal flow for an angled pipe geometry.

Tutorial for the flow of fluid through a pipe junction

Thermal Analysis of a Differential Casing

Drone propeller flow analysis simulation using MRF model and SimScale standard mesher.

Study of CO contamination inside a car park

This tutorial aims to showcase how to set up a compressible analysis. An aircraft wing geometry is used.

This projects aims to showcase the function of a golf ball's dimples, compared to a same ball of smooth surface.

Tutorial on incompressible flow simulation for aerodynamics studies, using SimScale Standard mesh algorighm.

This project shows the bending of an Aluminium pipe through rolling process.

Tutorial showing the workflow for nonlinear FEA structural analysis, including varying load, hyperelastic material and elastic support.

This project aims to showcase how to set up a harmonic analysis for an airfoil geometry. It is a continuation of the Frequency Analysis of an Airfoil (1/2) tutorial.

IA crash test tutorial for a dynamic simulation of an FSAE Impact Attenuator.

LED Spotlight project, aiming a bring the temperature of the diodes of a LED spotlight design below the maximum allowed temperature of 100C. A Conjugate Heat Transfer v2.0 analysis is used.

Public Profile

al2133003195's profile