SimScale simulation projects by akowalski | Page 1

akowalski's profile

The goal of simulation is to find shape of metal cover of the lamp with 20W LED and not to exceed the LED temperature.
I use Conjugate Heat Transfer sim.

My first Natural convection Simulation... Any thoughts on improvements please comment :) 

Finding the temperature inside the main box of the 3D printer, check the influence of the size of heat sinks on the chip temperature.

Finding  the temperature inside the main box of the 3D printer, check the influence of the size of heat sinks on the chip temperature.

Minimizing the resonant frequency of the structure.

The goal of simulation is to find max temperature of diode housing. I use 20W diode.
 I use heat transfer sim.

The goal of simulation is to find max temperature of diode housing and do I need to use fan to cool down. I use 4,5W optical power diode, max total power from supply approx. 15W. I use heat transfer sim.

The goal of simulation is to find max temperature of diode housing and do I need to use fan to cool down. I use heat transfer

The goal of simulation is to find max temperature of diode housing and do I need to use fan to cool down. I use 4,5W optical power diode, max total power from supply approx. 15W. 
I use heat transfer sim.

The goal of simulation is to find max temperature of diode housing and do I need to use fan to cool down.  I use heat transfer sim.

The goal of simulation is to find max temperature of diode housing. 
I use Conjugate Heat Transfer sim.

The goal of simulation is to find max temperature of diode housing. I use 20W diode. I use heat transfer sim.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

akowalski's profile