SimScale simulation projects by ajinj375 | Page 1

ajinj375's profile

Study of flow around tapered formula student nose design.

Flow simulation around Be 153- 175 profile

creating a proper air flow around the front wing of FSAE kart and learning it's effects on the wing.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

To simulate flow around a modified nissan GTR- trackside per

Flow around Nissan GTR is modeled and studied.

External aerodynamics simulation of FS race car

Studying flow around different profile setups

To perform FEA on the given bike frame model

FSAE-Workshop Session-2 Homework project for aerodynamics of complete Formula Student Race Car

For step by step tutorial see: 
1. https://www.simscale.com/forum/t/step-by-step-tutorial-session-2-full-car-aerodynamics-part-1/78878
2. https://www.simscale.com/forum/t/step-by-step-tutorial-session-2-full-car-aerodynamics-part-2/79350

FEA Master Class Session 3 handout: In this project the drop test of an iPhone 6 has been performed with and without case.

To simulate the flow around designed RW for custom GTR

In this tutorial, a aerodynamic analysis of a F1 frontwing is presented. The flow around the wing is modeled as an incompressible, turbulent flow using a k-epsilon turbulence model. This tutorial is based on the first part of the SimScale F1 Simulation workshop series about aerodynamics.

This project contains resources for Session 1 of the F1 Workshop

To understand the effect of side winds on the kart through simulating the conditions.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

ajinj375's profile