SimScale simulation projects by aermont | Page 1

aermont's profile

Investigation of wind turbine tower loading for lattice tower design by means of CFD simulation. - Copy

Proof of the anaylisis of a turbine - Copy

Aircraft flow visualization to explore potential sources of drag - Copy

Static Test Analysis
Run1: 3 Ton load when forklift lift the container
Run2: 3 Ton load when  the container lift by rope
Run3: 10 Ton load when two containers are above the bottom container - Copy

Goal: Test active isolation on shipping container used as workshop
Simulation: Thermal - Copy

CFD - Drag Coefficient Test / Drag Reduce It-001

This is an example poached from another analysis online. - Copy

The first simulation uses a mesh that is well layered which has 0 illegal faces...  The second simulation has a mesh that ERRORs with floating point exception error...  The only change that the 2nd mesh had was the addition of an Inside Cartesian Box  Region Refinement that tried to refine the 0.5 meter area around the car body to a finer Level 6 size...  When that refinement was added, the mesh creation errored... - Copy

This project is a simulation for heat transfer in a plate type heat exchanger. - Copy

Static and Dynamic simulation of a scissor lift - Copy

CFD Analysis on airflow at intake of Electric Ducted Fan. - Copy

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

aermont's profile