SimScale simulation projects by adiswiss | Page 1

adiswiss's profile

Validation of the original size with less power

Use the STL-File for the original NACA-0012-34

After the simulation failed, a try with the STL-File

18 m version of the deformt NACA-0012 profile

Validation of the compressed NACA-0012 Profile

compairing two meshes on the same frofile

Deforming the original NACA profile for a beter ratio

Validation the NACA- 0012-23 Profile as rotating body

A bis version of the l16m with 4m diameter

Test of the same dimension as the 50m3 12.9m version

The 60 percent version of the 10m profile

New validation of the 16m version with new mesh

Validation of the 22m version of the PP-50

Validation of the 21m version of the profile

Validation of the 23m version on the symetric profile

New Version of the extra flat Profile test

Validation of the extra long version of 50m3

Validation of the 50m3 version whitz 1.95m hight

validation of the extrem flatt pp-50m3 l20 body

Validating the Results of PP-50m3 l20 flat

Validation of a rotation version of the NACA-0015 profile

Validation of the 50m3 l20m in flat design

Validation the flat design of the PP-50m3 l16m

Public Profile