SimScale simulation projects by Zui | Page 1

Zui's profile

Find where the boundary layer starts separating from the upper surface of the wing profile

Drone propeller flow analysis simulation using MRF model and SimScale standard mesher.

We are designing a rotational dryer. To size the blower correctly we need to know the pressure drop between the entrance and exit of the dryer.

Conjugate heat transfer simulation tutorial.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

Zui's profile