SimScale simulation projects by YohanCurbelo | Page 1

YohanCurbelo's profile

Incompressible Fluid Flow analysis of two globe valves

In this exercise, you will perform a simple heat transfer analysis on the SimScale Platform and then compare the results to a hand-calculated solution.

In this exercise, you will complete a laminar pipe flow analysis

Copia de un tutorial sobre analaisis de PCB

The mean goal of this project is knowing the behaviour of the heat transfer among a PCB and 3 components and analyze the benefits of using thermal vias. A CHT simulation will be used as well as a Laminar turbulence model and a Steady-State time dependency. This is a school project.

Análisis tármico y de dinámica de fluidos de un PCB con 3 componentes

The mean goal of this project is knowing the behaviour of the heat transfer among a PCB and 3 components. A CHT simulation will be used as well as a Laminar turbulence model and a Steady-State time dependency. This is a school project.

In this exercise, we will consider the deflection of a cantilever beam with a concentrated load at the free end. We can calculate the deflection by hand and via a static analysis using the SimScale platform.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

YohanCurbelo's profile