SimScale simulation projects by WilbertF | Page 1

WilbertF's profile

The simulation will use 3d models of sharp edge delta wings that have plate airfoils. The root chord of each delta wing will be the same length, and the same quarter-root chord line. All the airfoil will be set at an angle of attack of 12°. For the models that were created a root chord of 100 units was chosen and the quarter- root chord line started at 75 units from the trailing edge.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

WilbertF's profile