Set up your own cloud-native simulation in minutes.Start Simulating Now
Raspberry Pi Enclosure Example - CHT
182
0Statistics
1 Geometry
1 Mesh
1 Simulation setup
5 Results
1 Geometry 1 Mesh 1 Simulation setup 5 ResultsAbout this project
The tutorial project is a sample Electronic cooling sink which consists of 3 solid regions and 1 fluid region. The solid regions are two FB-4 chips, which have a higher initial temperature and a heat sink over one of the chips. The air flows over the solid regions to remove the heat from it.
Related Projects
Project History
simscale created this project
Thermal24 copied this project