SimScale simulation projects by Sunish | Page 1

Sunish's profile

This project contains resources for Session 1 of the F1 Workshop

Incompressible Fluid Flow analysis of two globe valves

In this exercise, you will complete a laminar pipe flow analysis

to investigate the full car running in a straight line at 20 m/s with side wind.

Sample project for how to set-up the Hex-Dominant Parametric mesh for flow around a vehicle body.

This project is the starting point for the homework for Session 1  of  the Baja SAE workshop. It enables the user to analyse the plastic deformation in an All Terrain  Vehicle (ATV)  Suspension .

To investigate the behavior of drag and lift and determine the stall zone for two different front wing flap angles: 6 degrees (standard) and 18 degrees (high downforce) considering a constant inlet velocity of 20 m/s.

This is used as a starting point for the SimScale Users and participants of the Session  2 of the All-Terrain Vehicle Design Workshop

to investigate the Full car model FSAE Full Car with a radiator using the porous media approach, rotating wheels using the rotating wheel boundary condition, and rotation of the car rims using Multi Reference Frame (MRF)

Design front wing for a Formula SAE car and test it

Public Profile

Sunish's profile