SimScale simulation projects by Sougata99 | Page 1

Sougata99's profile

the goal of this project is to observe different thermal zones of an engine block

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation. - Copy

the goal of this project is to observe conduction heat transfer though pothood made of layers of different materials

The goal of this project is to simulate and observe flow pattern inside a centrifugal pump and observe different parameters like velocity, pressure, flow rate etc.

Transient CFD analysis of Centrifugal Pump - Copy

the goal of this project is to visualize and analyze flow pattern and fluid behaviour over a moving car .

The goal of the project is to observe flow pattern of exhaust gases from chiller fans when atmospheric air is flowing from one direction in presence and absence of an acoustic wall.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

Sougata99's profile