SimScale simulation projects by ShujaKhaleel | Page 1

ShujaKhaleel's profile

To analyze the stresses and arching in the Hopper

I test the stress analysis of a robotic gripper arm and try to find out the failure sections of the gripper arm.

Just a test to learn to use HVAC simulation

To analyze the effect of static load on a simply supported I beam

Testing a component for maximum stress at a cross section of it

The aim of the project is to test a moto g5 plus back cover under various loads such as tensile, compression.

The aim is to test the gear - pinion arrangement under dynamic loads

In this project my goal is to analyze the amount of dynamic load an LG G7 ThinQ would withstand.

To study the conductive heat transfer taking place through the thickness of the angular cylinder in the radial direction. Here I will be using the conductive heat transfer analysis to simulate this project

In this project my aim is to determine the strength of the I beam made of steel having young's modulus of 205GPa under different loading conditions for a cantilever beam.

My aim for this project is to test the durability of a cylindrical shaped steel pipe with young's modulus is 205GPa.  The loading conditions are: one end of the cylinder is fixed and the other end is free. On the free end a force is applied in a direction perpendicular to the longitudinal cylindrical axis. The maximum force that can be applied so that the cylinder does not yield is calculated.  

Conclusion from project: The safe load that can be applied at the end of the cylinder considered is 100kN.

My aim in this project is to study the characteristics of flow over a backward facing step.  I would be using a CFD simulation to simulate.

Public Profile

ShujaKhaleel's profile