SimScale simulation projects by Sam01 | Page 1

Sam01's profile

A threaded joint is subjected to a tensile load of 5000 N with a temperature of 100 C. The outer surfaces of the treaded joint are applied with convection of 20 W/m2-K, while keeping the other end fixed. Determine the von mises stresses along with the temperature distribution along this threaded joint

Determine the temperature and heat flux distribution over an exhaust pipe made up of aluminium alloy whose inner surfaces are exposed to hot flue gases with a temperature of 2000 C; while the outer surfaces are subjected to a convective film heat transfer coefficient of 20 W/m2-K.

Determine the temperature and heat  flux distribution over a piston block made up of aluminium alloy

Determine the von mises stress and displacement for a bridge and state whether it is capable of carrying load of 100 persons at a time considering 100 kg for each person.

An Oldham's coupling of aluminium alloy is subjected to a tensile, compressive and transverse load of 5000 N separately in three different cases

A kunckle joint of aluminium alloy is subjected to a tensile compressive and load of 5000 N separately in three different cases

Determine the von mises stress and displacement contours

Public Profile

Sam01's profile