SimScale simulation projects by Robert01 | Page 1

Robert01's profile

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Custom shape to circulate air and test the increase in force.

Experimenting with configurations to lower pressure on a hovering device.

Experimenting with configurations to Understand Using Simscale

Continuation of JF-Magnus Lifter. Refine the concepts of the MRF and cylinder and try to get closer to the ideal theory.

This tutorial project aims to showcase how to set up and run a simulation for a pump geometry. The Standard meshing tool was used.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

Robert01's profile