SimScale simulation projects by NVerzini | Page 1

NVerzini's profile

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This project involves the simulation of stress analysis of an aircraft wing. There are total 6 comparison configurations with 3 different models and two different load definition.

This project involves the simulation of ventilation in an aircraft cabin. There are 6 comparison configurations with 3 different inlets and 2 outlets.

This project simulates air flow around an Aircraft at low sub-sonic compressible flow regime.

Public Profile

NVerzini's profile