SimScale simulation projects by Mouliswar | Page 1

Mouliswar's profile

This is a slider for bottom pouring assembly.

This model is the bottom pouring setup for a furnace. Hence requires heat transfer analysis

The model is used to hold a resistance furnace on top.  The bottom part has been designed to have a bottom pouring setup too. Hence both static and thermal analysis is required.

The model is used to hold a resistance furnace on the top. The model also has a provision for bottom pouring . Hence both static and thermal analysis is done.

This model is the frame for bottom pouring arrangement. Hence static load analysis is required

This is the outer frame for bottom pouring assembly. Hence static loading analysis has to be done.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

Mouliswar's profile