SimScale simulation projects by Maxsense | Page 1

Maxsense's profile

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This project contains everything you need to work on the second homework assignment of the drone workshop

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

air cooling of a lamp with 100W, which airflow is needed to maintain 100C at the lamp

This project includes everything you need to get started with the homework assignment of our makers workshop

This project contains everything you need to work on your homework assignement

heating air which flows through a 100W tube

In this project the fluid flow through the tubes of a shell and tube heat exchanger has been analyzed with SimScale.

Public Profile

Maxsense's profile