SimScale simulation projects by MarcusAng | Page 1

MarcusAng's profile

The purpose of this project is to use experimental results from the Architectural Institute of Japan to validate CFD results gained from SimScale. The case being validated is Case E, which consists a complex of buildings with simplified geometry. Many scenarios are presented in Case E, The scenarios used to validate the SimScale platform were the North, East, South and Westerly winds for the after construction scenario.

The SimScale CFD results were compared to the experimental results and found to have good correlation. Some underprediction was seen in the k-epsilon models in the strong wind regions and underprediction in the wake regions, but is a known trait of the K-epsilon model and is acceptable and should be considered when evaluating results. - Copy

Computation of the thermal comfort and flow field inside a car cabin

This project simulates air flow around an Aircraft at low sub-sonic compressible flow regime.

Tutorial on incompressible flow simulation for aerodynamics studies, using SimScale Standard mesh algorighm.

This tutorial aims to showcase how to set up a compressible analysis. An aircraft wing geometry is used.

Public Profile

MarcusAng's profile