SimScale simulation projects by MarcoFekri | Page 1

MarcoFekri's profile

Liquid Flow through different kind of fans and propellers - Copy

Propeller_3.11.06-PropellerModel - Copy - Copy

Jet engine simulation -M2.5R ramjet engine test for the entire engine - Copy

Primary objective is to determine the vortex lift effect above the Concorde's delta wing
CAD provided by 'Aisak' here,  https://grabcad.com/library/proyect-concorde-unfinished-1 - Copy

This project involves meshing externally a Boeing 777-200 LR Aircraft, and then simulating its' operation on flight facing an airflow with an axial velocity of 50 m/s.  It is one of the longest-range commercial airliners, with an exterior length and wingspan reaching 63.70 and 64.80 meters respectively.  For this case a model with removed engines was chosen in order to assist convergence and meshing. Also a Symmetry plane was added midst the Part, and half the part was used for meshing and simulation for simplification.  A steady state compressible flow simulation is executed to visualize the air flow around the bodywork and wings of the aircraft, as well as the pressure distribution while on flight. - Copy

studies of propierties of boeing 787 - Copy

Stuedies, of surface, and body aerplane - Copy

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

MarcoFekri's profile