SimScale simulation projects by MalcolmAkner | Page 1

MalcolmAkner's profile

MSRE heat exchanger, used to validate CFD code

Public case for running MSRE radiator simulations. K-omega-SST turbulence model.

First test of the coolant salt volume of the PHE

First simulation of the fluid volume from the completed version of the PHE used in the MSRE at ORNL in the 60s

First test of the all the regions of the PHE done at ORNL
Mesh:
Coarseness: 3
Automatic Boundary layers: 3

First try of the MSRE PHE CFD, validation of method

Fluid Simulation inside the Core Block of the MSRE

This project aims to showcase the different configuration options for the standard meshing tool, including basic and advanced settings. The various refinements are also covered.

Conjugate heat transfer simulation tutorial.

Detailed tutorial following this guide: https://www.simscale.com/docs/tutorials/advanced-tutorial-fluid-flow-simulation-through-a-water-turbine/

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This tutorial project aims to showcase how to set up and run a simulation for a pump geometry. The Standard meshing tool was used.

Public Profile

MalcolmAkner's profile