SimScale simulation projects by MShapiro | Page 1

MShapiro's profile

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

170 m3, elbow removed,
outlet duct direct to WHB

Cyclone with inlet angled dowwards at 15 degrees

Cyclone03 with duct tilt axis in plane of conical surface.  Tilt angle 45 degrees

Cyclone02 with exit duct 270 deg from inlet and moved as close as possible to centre dome

Public Profile

MShapiro's profile