SimScale simulation projects by Karim_Ahmed | Page 1

Karim_Ahmed's profile

This  Study, investigates the possibility and the benefits of using a cross-flow fan embedded in an airfoil for simultaneous circulation control and thrust generation. In the propulsive wing concept, a cross flow fan is placed near the trailing edge of an airfoil section. When the fan starts to operate, the flow is drawn from the suction surface, provided by energy through the cross-flow fan and expelled out of the airfoil trailing edge

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

A chemically reacting fluid flows through a channel.Design considerations require that the flow area of the duct be abruptly
reduced to 1/10th of its size. To prevent destruction of the duct by the reacting fluid,no stagnant eddies at the contraction can be allowed.have some control over the duct length upstream of the contraction, and thus the velocity profile of the fluid approaching the contraction. To solve this problem, you must somehow
estimate the flow field near the contraction.

Public Profile

Karim_Ahmed's profile