SimScale simulation projects by Joshb2004 | Page 1

Joshb2004's profile

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

visualising the air flow of a formula 1 new regulation car especially seeing the dirty turbulent air of the rear

Flow through a junction in a pipe with an inlet in the top thin section at the middle and the flat edge connecting to the straight pipe
and a pressure outlet at the end of the curve in the pipe

formula 1 front wing analysis.
wing is from before 2017 when the regulations where made on wing complexity. these are complex wings

Public Profile

Joshb2004's profile