SimScale simulation projects by JavierFTex | Page 1

JavierFTex's profile

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Se realiza un análisis estructural estático aun disco de freno

Ejercicio 1 análisis de un perfil de ala

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Análisis de una base para pantalla y dos botellas

analisis estructural a un soporte para aparatos electrónicos

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

ejercicio de ejemplo para el análisis de esfuerzos

Tutorial project for setting up a Multi-phase flow simulation

In this tutorial, a aerodynamic analysis of a F1 frontwing is presented. The flow around the wing is modeled as an incompressible, turbulent flow using a k-epsilon turbulence model. This tutorial is based on the first part of the SimScale F1 Simulation workshop series about aerodynamics.

Public Profile

JavierFTex's profile