SimScale simulation projects by JASA | Page 1

JASA's profile

Experimenting the relation between the tip speed ratio of the turbine and the power coefficient of the turbine.

Show the new beginners how to replicate the VAWT analysis.

Study of the behavior of the NACA airfoil.

Playing and studying the straight-bladed VAWT.

Studying the behavior of the VAWT's blades. The blade chose for this study is the NACA 0021.

Playing and studying the curved blades Darrius VAWT.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This project aims to showcase the process of setting up and running an incompressible analysis. As a geometry, we have a Francis turbine. A MRF Rotating Zone is used for the runner.

Tutorial for the flow of fluid through a pipe junction

F1 Front Wing Geometry for Frontwing Tutorial

Tutorial project for setting up the Automated Hex-dominant for internal flow for an angled pipe geometry.

This project aims to showcase the different configuration options for the standard meshing tool, including basic and advanced settings. The various refinements are also covered.

Public Profile

JASA's profile