SimScale simulation projects by IlseGarcia | Page 1

IlseGarcia's profile

Study of CO contamination inside a car park

This project aims to showcase the different configuration options for the standard meshing tool, including basic and advanced settings. The various refinements are also covered.

Tutorial project for setting up the Automated Hex-dominant for internal flow for an angled pipe geometry.

This project aims to showcase the process of setting up and running an incompressible analysis. As a geometry, we have a Francis turbine. A MRF Rotating Zone is used for the runner.

Tutorial on incompressible flow simulation for aerodynamics studies, using SimScale Standard mesh algorighm.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

IlseGarcia's profile