SimScale simulation projects by IIPATEL | Page 1

IIPATEL's profile

Effect of the number of propeller blades on the Lift

Biomedical Workshop: Hip Joint Prosthesis

CFD Professional Training Exercise 5- Fan external flow case

The tutorial project is a sample Electronic cooling sink which consists of 3 solid regions and 1 fluid region. The solid regions are two FB-4 chips, which have a higher initial temperature and a heat sink over one of the chips. The air flows over the solid regions to remove the heat from it.

FEA Master Class Session 3 handout: In this project the drop test of an iPhone 6 has been performed with and without case.

This is the bike frame template for the professional training on Finite-Element Analysis - http://www.simscale-academy.com/

In this exercise, we will consider the deflection of a cantilever beam with a concentrated load at the free end. We can calculate the deflection by hand and via a static analysis using the SimScale platform.

Related to step-by-step tutorial of the biomedical workshop (session 1)

https://www.simscale.com/forum/t/biomedical-engineering-workshop-session-1-stress-shielding-in-a-hip-joint-prosthesis/36830/3

In this exercise, you will perform a simple heat transfer analysis on the SimScale Platform and then compare the results to a hand-calculated solution.

In this exercise, you will complete a laminar pipe flow analysis

In this exercise, you will use linear static analysis to analyze several configurations of an aircraft engine bracket under a vertical load.

Public Profile

IIPATEL's profile

Forum Activity