SimScale simulation projects by Grimsehl | Page 1

Grimsehl's profile

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Incompressible Fluid Flow analysis of two globe valves

In this exercise, you will perform a simple heat transfer analysis on the SimScale Platform and then compare the results to a hand-calculated solution.

In this exercise, you will use linear static analysis to analyze several configurations of an aircraft engine bracket under a vertical load.

In this exercise, we will consider the deflection of a cantilever beam with a concentrated load at the free end. We can calculate the deflection by hand and via a static analysis using the SimScale platform.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

In this exercise, you will complete a laminar pipe flow analysis

Iterative study to optimize the zipline top bracket

First in a series of stress tests in order to optimise the design
An axis, assembly for a zipline wheel, the axis is welded to a sheetmetal component. It will be a static strength analysis.

First Iteration , attempting to reduce weight.

Estimate the flow in a dam with a barge in it

Evaluate the effect of a barge in the flow of a dam

Rev 2 on the design, hoping for increased rigidity and strength.

Try and get the flow characteristics in a portion of a dam

Solar iradiation of a pipe in a CSP device.

Tutorial project for setting up a Multi-phase flow simulation

Public Profile

Grimsehl's profile