SimScale simulation projects by GSleds | Page 1

GSleds's profile

Thermal simulations for a heatpipe heatsink designed for high-power COB LEDs.
The dimensions of the heat sink are 340 * 120 * 65 mm, 3 heat pipes of 8 mm are used, the calculated area is about 7000 square cm. In theory, the heat sink should distribute 220 W of the connected electrical power. LEDs from Lumileds COB GEN 4 1825 4070 series

LED Spotlight project, aiming a bring the temperature of the diodes of a LED spotlight design below the maximum allowed temperature of 100C. A Conjugate Heat Transfer v2.0 analysis is used.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

GSleds's profile