SimScale simulation projects by DavidRosello | Page 1

DavidRosello's profile

As we have been studding in the course lectures, if the fluid has very high viscosity, the velocity
is low and has a predominant direction, velocity gradients are also low and the geometry of the case 
is well delimited, the convective term in the Navier-Stokes equations can usually be neglected in 
front of the viscous term. Then, a very low Reynolds number characterizes these flows, and they 
are typically laminar. The dynamic equations (Navier-Stokes without the inertial terms) are known as 
Stokes equations, and these flows as Stokes flows.

Utilizaremos CFD para calcular la presion

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

DavidRosello's profile