SimScale simulation projects by ChiHin | Page 1

ChiHin's profile

Visualising the Y250 vortex on an F1 Front Wing

Forced Convective Heat Transfer - Raspberry Pi

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

The purpose of the simulation is to compare between the performances of different ventilation schemes, the conventional low level supply, high level exhaust system and a proposed system with low level exhaust and high level supply and predict the distributions of CO mass fraction and velocities at different operating scenarios to meet the tenability criteria.

Public Profile

ChiHin's profile