SimScale simulation projects by AlejandroEA | Page 1

AlejandroEA's profile

Weight is one of the most critical parameters in aircraft design. In this challenge, you will be provided with a baseline design of an aluminum aircraft wing. Your objective is to reduce the weight of the wing without exceeding the maximum allowable deflection (+ y direction) of .90 meters.

This project simulates air flow around an Aircraft at low sub-sonic compressible flow regime.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

AlejandroEA's profile