SimScale simulation projects by 6292 | Page 1

6292's profile

ctdddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddd

Determine the temperature and heat flux distribution over a heat sink made up of Aluminium alloy whose base is attached on the CPU which is releasing heat flux at the rate of 2000 W/m2. In order to cool it a cooler booster fan blows air for which convective film heat transfer coefficient of 20 W/m2-K is maintained.

An Oldham's coupling of aluminium alloy is subjected to a tensile, compressive and transverse load of 5000 N separately in three different cases.

A knuckle joint of Aluminium alloy is subjected to a tensile, compressive and transverse load of 5000 N separately in three different cases. Determine the von mises stress and displacement contours and state whether the knuckle joint should be used or not and in which case the stresses and displacements are lowest.

A connecting rod of aluminum alloy is subjected to a tensile force of 5000 N. Determine the von mises stress and displacement contours and state whether the connecting rod should be used or not?

Public Profile

6292's profile