SimScale simulation projects by wananisfarzana | Page 1

wananisfarzana's profile

Cage to push the rubbish out once the sensor detects it

shroud at 0 degree but outer diameter of 330

shroud with 60 degree and 1.82 outer diameter

shroud with height 1.8m and 4 sets of blade bent at angle 20 and 55

shroud 4 with 5 sets of blades instead of the original 4

Shroud 4 design but with 6 set of double blade

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

wananisfarzana's profile