SimScale simulation projects by tsoares | Page 1

tsoares's profile

Testing deformation in cylindrical part with and without ribs

Testing deflections in cylindrical part with and without ribs

test project to see if it's possible to get the natural sloshing frequencies for liquid in a ladle using Simscale.

A test project on how to get drag coefficients and center of pressure for a small submersible.

Pot for transporting molten metal in foundries.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Setup for the measurement of the natural frequencies of a liquid in a pot.

Tutorial project for Aerodynamic simulation of compressible flow over Airfoil

Public Profile

tsoares's profile