SimScale simulation projects by rfrancis_konik | Page 1

rfrancis_konik's profile

- Project goal is to analyse the electric motor thermal distribution in rotor and stator
- To analyze the temperature variations during heat generation 
- Thermal simulation - Copy - Copy

This advanced thermal management tutorial describes the setup and analysis of electronics cooling on an electronics box containing different electronic components being cooled by the airflow of a fan.

LED Spotlight project, aiming a bring the temperature of the diodes of a LED spotlight design below the maximum allowed temperature of 100C. A Conjugate Heat Transfer v2.0 analysis is used.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Analyse the duct positioning to have effective ventilation system

Forced Convective Heat Transfer - Raspberry Pi

Public Profile

rfrancis_konik's profile