SimScale simulation projects by pmadasamy | Page 1

pmadasamy's profile

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial on incompressible flow simulation for aerodynamics studies, using SimScale Standard mesh algorighm.

This tutorial shows how an incompressible turbulent airflow around a Formula Student vehicle moving in a straight line can be simulated.

Empty project containing the geometry of an engine piston for the thermomechanical tutorial of an engine piston

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This tutorial project aims to showcase how to set up and run a simulation for a pump geometry. The Standard meshing tool was used.

Study of CO contamination inside a car park

Drone propeller flow analysis simulation using MRF model and SimScale standard mesher.

This projects aims to showcase the function of a golf ball's dimples, compared to a same ball of smooth surface.

This tutorial aims to showcase how to set up a compressible analysis. An aircraft wing geometry is used.

Public Profile

pmadasamy's profile