SimScale simulation projects by mpetraitis | Page 1

mpetraitis's profile

The fluid (Water) is injected into well at 22C and brought back to surface via insulated pipe. The temperature gradient of well surface is 40C per 1000m. 

The goal of the project is to study the well surface temperature given the fixed flow rate of water.

Thermal analysis simulation is to be used.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

mpetraitis's profile