SimScale simulation projects by mp1 | Page 1

mp1's profile

This validation case belongs to fluid dynamics. The aim of this validation case is to validate the conjugate heat transfer(CHT) v2.0 analysis implemented in SimScale.
The simulation results of SimScale were compared to the results presented in the study titled  Unshrouded Plate Fin Heat Sinks for Electronics Cooling: Validation of a Comprehensive Thermal Model and Cost Optimization in Semi-Active Configuration written by L. Ventola, G. Curcuruto, et. al. - Copy

This advanced thermal management tutorial describes the setup and analysis of electronics cooling on an electronics box containing different electronic components being cooled by the airflow of a fan.

This project demonstrates the validity of the CHTv2 and IBM solver. through a Conjugate Heat Transfer (CHT) analysis of a battery pack.
 
Validation Experiment Reference:
A peer-reviewed publication on battery pack thermal validation  has been used as basis for this study (with reasonable assumptions and approximations): 
https://www.mdpi.com/1996-1073/10/8/1157 - Copy

This study aims at validating the CHT v2 solver of SimScale GmbH
This study attempts to validate both solid and fluid domain thermal and flow properties
A peer-reviewed battery pack publication has been used as basis for this validation case.
Reasonable assumptions and approximations have been made to bridge uncertainty in the publication
Code Verification is also carried out to determine the sensitivity to the mesh and to the Boussinesq approximation - Copy

Conjugate heat transfer simulation tutorial with U-tube heat exchanger. - Copy

LED Spotlight project, aiming a bring the temperature of the diodes of a LED spotlight design below the maximum allowed temperature of 100C. A Conjugate Heat Transfer v2.0 analysis is used.

In this tutorial, the transport of exhaust gases into the atmosphere is simulated. Gases will come out of two chimneys of a plant.

This tutorial contains a thermal comfort project, which analyses the duct positioning inside a theater, in order to have an effective ventilation system.

Computation of the thermal comfort including Local Mean Age of Air and radiation in a meeting room using CFD simulation.

Conjugate heat transfer simulation tutorial.

This tutorial project aims to showcase how to set up and run a simulation for a pump geometry. The Standard meshing tool was used.

Computation of the thermal comfort and flow field inside a car cabin

This tutorial shows how an incompressible turbulent airflow around a Formula Student vehicle moving in a straight line can be simulated.

This tutorial case shows how to perform an external flow analysis of a Car. - Copy

This project simulates laminar flow through a straight circular pipe. - Copy

This project simulates turbulent flow through a straight circular pipe.  Two turbulence models were used: kEpsilon and kOmegaSST. Simulation results were validated using corresponding analytical expressions. - Copy

Public Profile

mp1's profile