SimScale simulation projects by lsutton | Page 1

lsutton's profile

Vertical plenum options - velocity analysis

The objective of this simulation is to become familiar with the fan-based Boundary Conditions implemented in SimScale. 
These Boundary Conditions create a  pressure drop on the face applied. This pressure drop depends on the flux going in/out through the surface, and they are related following the charasteristic curve of the fan.

Using this Boundary Conditions, different types of fans can be simulated behind the surfaces, and their effects on the different ducts can be estimated. - Copy

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

lsutton's profile