Set up your own cloud-native simulation in minutes.Start Simulating Now
Pierce Hole Size - Sheet Metal Test
0
203
0
203 0
0Statistics
1 Geometry
1 Mesh
1 Simulation setup
0 Results
1 Geometry 1 Mesh 1 Simulation setup 0 ResultsAbout this project
The test is to verify on the minimum hole size design on the sheet metal. The sheet metal used was a 1.5mm thickness. This is to simulate on the force applied to make a hole when manufacture in the real situation
Related Projects
by simscalesimscale
by ahmedhussain18ahmedhussain18
by ahmedhussain18ahmedhussain18
by ahmedhussain18ahmedhussain18
Project History
khazairanzawari created this project